Arduino Uno Microcontroller Programming as a Timer for Hotplate Magnetic Stirrers

irwan Nova; Ana Uzla BatuBara; Mandapot Tua Naibaho

doi:10.55227/ijhet.v4i5.566

Authors

irwan Nova Electromedical Engineering Technology, STIKes Binalita Sudama Medan
Ana Uzla BatuBara Nursing, STIKes Binalita Sudama Medan
Mandapot Tua Naibaho Electromedical Engineering Technology, STIKes Binalita Sudama Medan

DOI:

https://doi.org/10.55227/ijhet.v4i5.566

Keywords:

Arduino Uno, Stirrer, buzzer, RPM

Abstract

Based on the title above, this scientific paper aims to analyze the Arduino Uno programming on the Magnetic Stirrer Hotplate tool with the addition of a timer. The Magnetic Stirrer Hotplate functions to homogenize the solution at a certain temperature, rpm and time. If the set timer has been reached, the buzzer will turn on, which aims to let the operator or user know that the tool has finished mixing the chemicals. The results of the microcontroller programming test on the timer control circuit using the C++ language were successfully carried out and the circuit functioned according to the programming instructions..

Downloads

Download data is not yet available.

References

Catur Indriyanto, 2021. Hot Plate Magnetic Stirrer dengan Tampilan Temperatur dan Kecepatan Motor, Jakarta: Universitas Mohammad Husni Thamrin

Franky Sahalatua Tampubolon, 2022. Rancang BangunTimer pada AlatHotplate Magnetic Stirrer Berbasis Arduino Uno, Medan : STIKes Binalita Sudama Medan

Hariza Faisal, Wildian, Meqorry Yusfi, 2013. Rancang Bangun Magnetik Stirrer Berbasis Mikrokontroler AT89S52 Dengan Pengaturan Waktu Melalui Keypad, Padang : Universitas Andalas

Ira Isti’anah, 2017. Rancang Bangun Hotplate Magnetic Stirrer Berbasis Mikrokontroler ATMega8, Yogyakarta : Universitas Muhammadiyah Yogyakarta.

Junaidi, Hesti Wahyu Handani, Amir Supriyanto, dan Sri Wahyu Suciyati. 2020. Kontrol Kecepatan dan Temperatur dengan Teknik Pulse Width Modulation untuk Aplikasi Hotplate Stirrer Berbasis Arduino, Bandar Lampung : FMIPA Universitas Lampung

Lalu Patria Irsyad, Yudianingsi, Sri Lestari, 2016. Perancangan Alat Magnetic Stirrer Dengan Pengaturan Kecepatan Pengaduk dan Pengaturan Waktu Pengadukan, Yogyakarta : Universitas Respati Yogyakarta

Muhammad Nasrullah, 2016 : Hotplate Magnetic Stirrer denganpengendali berbasis mikrokontroler ATmega 16, Yogyakarta : Politeknik Muhammadiyah Yogyakarta.

Nurul A’malia Widhanti,2018. Pemodelan Hot Plate Stirer Berbasis Arduino Uno, Jakarta : Politeknik Kesehatan Jakarta II

Sunggu Pakpahan, 2020. Rancang Bangun Hotplate Magnetic Stirrer Dengan Tampilan Digital Menggunakan Arduino Uno ATMega 328P, Medan : STIKes BinalitaSudama Medan.